- SKU:
- RRP-26531
- UPC:
- 699288265319
- Condition:
- New
- Availability:
- Delivery within 10 business days
- Width:
- 3.00 (in)
- Height:
- 2.00 (in)
- Depth:
- 5.00 (in)
- Part Number:
- 26531
- Specific Placement:
- Front Outer
- Surface Finish:
- Sealed
- Quantity per Car:
- 2
- Material:
- Unspecified Length
- Note 1:
- Manual Steering
Steering Tie Rod End for 1982-1998 Nissan Multiple Models Base / Classic / GXE / Limited Edition / SE / SE-R Hatchback / Sedan 1 Piece
Note: Non Greaseable, Non Greaseable~ Thru 12/85, Greaseable, Non Greaseable; U.S. Built, Japan Built, To 6/89
EngineId Size: L4; 2.0L; ; 1998cc; 122cid
Position: Front Outer
Drive Type: 4WD
Steering System: Manual
Rod Thread: M12-1.25
Bar Size: 0.892
RH/LH: RH
Male or Female: Female
Large Dia. Taper: 0.6094476
Small Dia. Taper: 0.5059045
Stud Thread Size: M12-1.25
Stud Length: 0.62
Length Ctr. Stud to End: 3.50393700787402
Config.: Straight
Greaseable: No
Dust Boot Included: Yes
Package Contents: 1 Tie Rod End, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin
Specifications
Part Number: 26531
Specific Placement: Front Outer
Surface Finish: Sealed
Length: Stud: 0.62
Rod Thread: M12-1.25
Bar Size: 0.892
RH/LH: RH
Male or Female: Female
Large Dia. Taper: 0.6094476
Small Dia. Taper: 0.5059045
Stud Thread Size: M12-1.25
Stud Length: 0.62
Length Ctr. Stud to End: 3.50393700787402
Config.: Straight
Greaseable: No
Dust Boot Included: Yes
Package Contents: 1 Tie Rod End, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin
Note: Non Greaseable, Non Greaseable~ Thru 12/85, Greaseable, Non Greaseable; U.S. Built, Japan Built, To 6/89
EngineId Size: L4; 2.0L; ; 1998cc; 122cid
Position: Front Outer
Drive Type: 4WD
Steering System: Manual
Do you hear creaking, popping, or clunking sounds when turning sharp corners? It's probably the steering tie rod ends that need to be replaced. A steering tie rod end connects the steering rack to the steering knuckle on each front wheel. When they get worn, they make unsettling sounds during turns and may even cause the wheel to collapse!
• Designed and engineered in CAD programs to meet OEM specifications
• Manufactured in the US, made from high grade, long lasting steel
• Available for all popular models of classic and vintage vehicles (see below)
• Get rid of that sound from the wheels when turning corners
• Warning: A broken tie rod end can lead to serious accidents. Replace them today and drive safe
Be sure to double check the fitment section and ensure this part fits your vehicle.
About Collectors Auto Supply
This auto part is covered by Collectors Auto Supply's three-dimensional promise — you'll get the right part the first time, you can talk to us, and with over 25 years in business and 100,000+ customer transactions, you can trust us to be the right choice to fuel your passion.
Collectors Auto Supply offers premium replacement auto parts and the experience to get you the right parts for your vehicle. Our group of experts has a combined knowledge of more than a half-century specializing in classic restoration components. Together, we’ve been making old rides new again for more than 25 years.
The customer service from Collectors Auto Supply is unparalleled, and our products are top-notch. If you’ve been searching for a hard-to-find replacement component, look no further. We have countless suppliers throughout the country, which means, if the part you need is out there, we’ll find it.
This product comes with a life time guarantee to be free of defects in material and workmanship. Our guarantee is valid only if our product has been properly installed in the vehicle for which it was designed to fit.
Nissan 200SX
Nissan Maxima
Nissan NX
Nissan Pulsar
Nissan Pulsar NX
Nissan Sentra
Nissan Stanza
Note: Non Greaseable, Non Greaseable~ Thru 12/85, Greaseable, Non Greaseable; U.S. Built, Japan Built, To 6/89
EngineId Size: L4; 2.0L; ; 1998cc; 122cid
Position: Front Outer
Drive Type: 4WD
Steering System: Manual
Rod Thread: M12-1.25
Bar Size: 0.892
RH/LH: RH
Male or Female: Female
Large Dia. Taper: 0.6094476
Small Dia. Taper: 0.5059045
Stud Thread Size: M12-1.25
Stud Length: 0.62
Length Ctr. Stud to End: 3.50393700787402
Config.: Straight
Greaseable: No
Dust Boot Included: Yes
Package Contents: 1 Tie Rod End, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin
Specifications
Part Number: 26531
Specific Placement: Front Outer
Surface Finish: Sealed
Length: Stud: 0.62
Rod Thread: M12-1.25
Bar Size: 0.892
RH/LH: RH
Male or Female: Female
Large Dia. Taper: 0.6094476
Small Dia. Taper: 0.5059045
Stud Thread Size: M12-1.25
Stud Length: 0.62
Length Ctr. Stud to End: 3.50393700787402
Config.: Straight
Greaseable: No
Dust Boot Included: Yes
Package Contents: 1 Tie Rod End, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin
Note: Non Greaseable, Non Greaseable~ Thru 12/85, Greaseable, Non Greaseable; U.S. Built, Japan Built, To 6/89
EngineId Size: L4; 2.0L; ; 1998cc; 122cid
Position: Front Outer
Drive Type: 4WD
Steering System: Manual
Do you hear creaking, popping, or clunking sounds when turning sharp corners? It's probably the steering tie rod ends that need to be replaced. A steering tie rod end connects the steering rack to the steering knuckle on each front wheel. When they get worn, they make unsettling sounds during turns and may even cause the wheel to collapse!
• Designed and engineered in CAD programs to meet OEM specifications
• Manufactured in the US, made from high grade, long lasting steel
• Available for all popular models of classic and vintage vehicles (see below)
• Get rid of that sound from the wheels when turning corners
• Warning: A broken tie rod end can lead to serious accidents. Replace them today and drive safe
Be sure to double check the fitment section and ensure this part fits your vehicle.
About Collectors Auto Supply
This auto part is covered by Collectors Auto Supply's three-dimensional promise — you'll get the right part the first time, you can talk to us, and with over 25 years in business and 100,000+ customer transactions, you can trust us to be the right choice to fuel your passion.
Collectors Auto Supply offers premium replacement auto parts and the experience to get you the right parts for your vehicle. Our group of experts has a combined knowledge of more than a half-century specializing in classic restoration components. Together, we’ve been making old rides new again for more than 25 years.
The customer service from Collectors Auto Supply is unparalleled, and our products are top-notch. If you’ve been searching for a hard-to-find replacement component, look no further. We have countless suppliers throughout the country, which means, if the part you need is out there, we’ll find it.
This product comes with a life time guarantee to be free of defects in material and workmanship. Our guarantee is valid only if our product has been properly installed in the vehicle for which it was designed to fit.
Nissan 200SX
Nissan Maxima
Nissan NX
Nissan Pulsar
Nissan Pulsar NX
Nissan Sentra
Nissan Stanza
