Steering Bell Crank for 1984-85 Toyota, Van

Steering Bell Crank For 1984-85 Toyota, Van

Specifications

PartNo: 20611
Note: This part is R&R only. Part must be sent in to be remanufactured.
Position: Front
Drive Type: RWD
Number of Pieces: 1

Hole Quantity:

Hole Quantity:: 2
:
Hole #1 Pivot Hole:

Hole #1 Pivot Hole:: 0.903
:
Hole #2:

Hole #2:: 0.572
:
Ctr. To Ctr. Holes:

Ctr. To Ctr. Holes:: 5.1875
:
Ctr. To Ctr. Pivot Hole to Ball:

Ctr. To Ctr. Pivot Hole to Ball:: 5.6875
:
Stud Dia. Small Taper:

Stud Dia. Small Taper:: TBD
:
Overall Dimensions:

Overall Dimensions:: 7.8125
:
Mounting Hardware Included:

Mounting Hardware Included:: Partial
:
Bell Crank Angle (Degrees):

Bell Crank Angle (Degrees):: TBD
:
Package Content:

Package Content:: 1 Bell crank, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin, 1 Grease Fitting
:
Hole Quantity:2
Hole #1 Pivot Hole:0.903
Hole #2:0.572
Ctr. To Ctr. Holes:5.1875
Ctr. To Ctr. Pivot Hole to Ball:5.6875
Stud Dia. Small Taper:TBD
Overall Dimensions:7.8125
Mounting Hardware Included:Partial
Bell Crank Angle (Degrees):TBD
Package Content:1 Bell crank, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin, 1 Grease Fitting

---

Specifications

Part Number: 20611
:
Hole Quantity:

Hole Quantity:: 2
:
Hole #1 Pivot Hole:

Hole #1 Pivot Hole:: 0.903
:
Hole #2:

Hole #2:: 0.572
:
Ctr. To Ctr. Holes:

Ctr. To Ctr. Holes:: 5.1875
:
Ctr. To Ctr. Pivot Hole to Ball:

Ctr. To Ctr. Pivot Hole to Ball:: 5.6875
:
Stud Dia. Small Taper:

Stud Dia. Small Taper:: TBD
:
Overall Dimensions:

Overall Dimensions:: 7.8125
:
Mounting Hardware Included:

Mounting Hardware Included:: Partial
:
Bell Crank Angle (Degrees):

Bell Crank Angle (Degrees):: TBD
:
Package Content:

Package Content:: 1 Bell crank, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin, 1 Grease Fitting
:
Hole Quantity:2
Hole #1 Pivot Hole:0.903
Hole #2:0.572
Ctr. To Ctr. Holes:5.1875
Ctr. To Ctr. Pivot Hole to Ball:5.6875
Stud Dia. Small Taper:TBD
Overall Dimensions:7.8125
Mounting Hardware Included:Partial
Bell Crank Angle (Degrees):TBD
Package Content:1 Bell crank, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin, 1 Grease Fitting

---

About Collectors Auto Supply

This auto part is covered by Collectors Auto Supply's three-dimensional promise — you'll get the right part the first time, you can talk to us, and with over 25 years in business and 100,000+ customer transactions, you can trust us to be the right choice to fuel your passion.

Collectors Auto Supply offers premium replacement auto parts and the experience to get you the right parts for your vehicle. Our group of experts has a combined knowledge of more than a half-century specializing in classic restoration components. Together, we’ve been making old rides new again for more than 25 years. 

The customer service from Collectors Auto Supply is unparalleled, and our products are top-notch. If you’ve been searching for a hard-to-find replacement component, look no further. We have countless suppliers throughout the country, which means, if the part you need is out there, we’ll find it. 

This product comes with a life time guarantee to be free of defects in material and workmanship. Our guarantee is valid only if our product has been properly installed in the vehicle for which it was designed to fit.