Steering Tie Rod End for 1975-1977 Ford F-500 1 Piece

Steering Tie Rod End for 1975-1977 Ford F-500 1 Piece

Note: W/ FA71, FA73, FA101, FA104, I50, I60 & I75 Navistar Axles; 1"-16 Threads; 4.5" Long, W/ 7000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 5500 - 7000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 6000 Or 7000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 6000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 7000Lb. Axle; 1"-16 Rod Thread; 4.5" Long~ From Ser. #G90,001, 1"-16 Rod Thread; 4.5" Long, W/ 5000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 5000 - 7000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 5000 Or 5500Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 5000 Or 6000Lb. Axle; 1"-16 Rod Thread; 4.5" Long
Position: Front Right, Front Right Outer

Rod Thread: 1.0-16
Bar Size: 0.994
RH/LH: RH
Male or Female: Male
Large Dia. Taper: 0.899
Small Dia. Taper: 0.78
Stud Thread Size: 3/4-16
Stud Length: 0.938
Length Ctr. Stud to End: 4.5
Config.: Straight
Greaseable: Yes
Dust Boot Included: Yes
Package Contents: 1 Tie Rod End, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin, 1 Grease Fitting

---

Specifications

Part Number: 25480
Specific Placement: Front Right
Surface Finish: Greasable
Length: Stud: 0.938
Rod Thread: 1.0-16
Bar Size: 0.994
RH/LH: RH
Male or Female: Male
Large Dia. Taper: 0.899
Small Dia. Taper: 0.78
Stud Thread Size: 3/4-16
Stud Length: 0.938
Length Ctr. Stud to End: 4.5
Config.: Straight
Greaseable: Yes
Dust Boot Included: Yes
Package Contents: 1 Tie Rod End, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin, 1 Grease Fitting
Note: W/ FA71, FA73, FA101, FA104, I50, I60 & I75 Navistar Axles; 1"-16 Threads; 4.5" Long, W/ 7000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 5500 - 7000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 6000 Or 7000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 6000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 7000Lb. Axle; 1"-16 Rod Thread; 4.5" Long~ From Ser. #G90,001, 1"-16 Rod Thread; 4.5" Long, W/ 5000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 5000 - 7000Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 5000 Or 5500Lb. Axle; 1"-16 Rod Thread; 4.5" Long, W/ 5000 Or 6000Lb. Axle; 1"-16 Rod Thread; 4.5" Long
Position: Front Right, Front Right Outer

---

Do you hear creaking, popping, or clunking sounds when turning sharp corners? It's probably the steering tie rod ends that need to be replaced. A steering tie rod end connects the steering rack to the steering knuckle on each front wheel. When they get worn, they make unsettling sounds during turns and may even cause the wheel to collapse!

• Designed and engineered in CAD programs to meet OEM specifications
• Manufactured in the US, made from high grade, long lasting steel
• Available for all popular models of classic and vintage vehicles (see below)
• Get rid of that sound from the wheels when turning corners
• Warning: A broken tie rod end can lead to serious accidents. Replace them today and drive safe

Be sure to double check the fitment section and ensure this part fits your vehicle.

About Collectors Auto Supply

This auto part is covered by Collectors Auto Supply's three-dimensional promise — you'll get the right part the first time, you can talk to us, and with over 25 years in business and 100,000+ customer transactions, you can trust us to be the right choice to fuel your passion.

Collectors Auto Supply offers premium replacement auto parts and the experience to get you the right parts for your vehicle. Our group of experts has a combined knowledge of more than a half-century specializing in classic restoration components. Together, we’ve been making old rides new again for more than 25 years. 

The customer service from Collectors Auto Supply is unparalleled, and our products are top-notch. If you’ve been searching for a hard-to-find replacement component, look no further. We have countless suppliers throughout the country, which means, if the part you need is out there, we’ll find it. 

This product comes with a life time guarantee to be free of defects in material and workmanship. Our guarantee is valid only if our product has been properly installed in the vehicle for which it was designed to fit.
Ford B600
Ford B700
Ford B7000
Ford C600
Ford C700
Ford C7000
Ford C800
Ford C8000
Ford C900
Ford CF6000
Ford CF7000
Ford CT8000
Ford F-500
Ford F600
Ford F700
Ford F7000
Ford F800
Ford F800 LPO
Ford F8000
Ford FT800
Ford L800
Ford L8000
Ford L8000F
Ford L900
Ford L9000
Ford LN600
Ford LN700
Ford LN7000
Ford LN800
Ford LN8000
Ford LN900
Ford LN9000
Ford M-400
International Harvester 1925 S
International Harvester 1955
International Harvester 2155
International Harvester F1924
International Harvester F1954
International Harvester S1724
International Harvester S1754
International Harvester S1823
International Harvester S1824
International Harvester S1853
International Harvester S1854
International Harvester S1924
International Harvester S1954
International Harvester S1955
International Harvester S2125
International Harvester S2155